Key Border Settings - 15 - Sony BZDM-7020 User Manual

Background and Edge Effects
KEY BORDER Settings – 15
5-26
Chapter 5 Special Effects Operations
2
Make the following settings, as required.
Function key Function
F1 Set the edge softness of
(SOFTNESS the drop shadow.
TYPE)
FLAT: the edge softness
of the drop shadow is
uniform.
DEPTH: the edges of the
drop shadow become
softer further from the
light source.
F2 (FLAT Use a single hue for the
COLOR) drop shadow.
F3 (HUE Use a progressively
ROT) changing hue for the drop
shadow.
F4 (MIX Use a "color mix" for the
COLOR) drop shadow.
F5 (EXT Use an external video
VIDEO) signal for the drop
shadow.
This provides a border around a key, or a key which is an outline
only.
This function requires the BKDM-7060 and BKDM-7070 options.
Note
The following effects use the same hardware, and it is therefore
not possible to use more than one of them simultaneously. The
last selected effect is effective.
• Drop shadow (3D)
• Key border
• Glow
• Brick
Parameter settings
Left ("Ofst"): reference level
for "DEPTH" control (–100
to +100%)
Center ("Gain"): gain for
shadow edge softness
(–100 to +100%)
Right ("Soft"): shadow edge
softness (0 to 100%)
The left and center knobs are
only effective when you
selected "DEPTH".
See "BKGD Settings" (page 5-
13).
See "COLOR MIX Settings"
(page 5-38).
See "External Video Input and
Output Settings" (page 6-14)