Sony BZDM-7020 User Manual page 132

Freeze and Afterimage Effects
5-48
Chapter 5 Special Effects Operations
Selecting the video for the afterimage part – F3 (TRAIL
TYPE) and F4 (SOURCE TYPE)
Use the following procedure.
1
Press F3 (TRAIL TYPE), and select the type of video to be
used for the afterimage part.
LIVE: live video
FREEZE: write a freeze frame of the same size as the input
video to recursive memory.
2
Press F4 (SOURCE TYPE), and select the video or color
matte to be used for the afterimage part.
FLAT: a single hue
HUE ROT: a progressively changing hue
MIX: a "color mix"
EXT VIDEO: external video
RANDOM: random colors
• The "MIX" option is only valid when the BKDM-3040 option is
installed.
• The "EXT VIDEO" option is only valid when the BKDM-3050
option is installed.
Select the color, or carry out adjustments as follows. (When you
select "EXT VIDEO" there are no adjustments.)
Selecting a single-hue matte for the afterimage part – F4
(SOURCE TYPE) "FLAT"
After pressing F4 (SOURCE TYPE) and selecting "FLAT", set the
color parameters.
• Left knob ("Lum"): luminance (0 to 100%)
• Center knob ("Sat"): saturation (0 to 100%)
• Right knob ("Hue"): hue (0 to 359.99˚)