Video Signal And Key Signal Settings (When Using A Source Selector) – 51 - Sony BZDM-7020 User Manual

Video Signal and Key Signal Settings
(When Using a Source Selector) – 51
Selecting the front video and key signals
When using a source selector (see page 10-19), make settings
applying to the video and key signals for each of the front and
back of the image.
For a reminder of the meanings of "front" and "back" in this
context, see the figure on page 6-4.
In the IN/OUT menu, press F1 (IN/OUT SELECT), and the soft
key indications appear as follows.
FRONT
FRONT FRONT KEY
VIDEO KEY MODE
IN/OUT SELECT menu soft key indications
In this menu, it is possible to select the video and key signals used
for both front and back video.
Use the following procedure.
1
Press F1 (FRONT VIDEO).
The system is now ready to accept a front video selection.
2
Enter the button number (0 to 63) of the video signal to be
selected using the numeric keypad, and press the ENTER
button.
This selects the video signal.
3
To select the key signal by button number, press F2 (FRONT
KEY).
To select the key signal previously assigned to the selected
video signal, press F6 (AUTO KEY SELECT), turning it on,
and skip to step 5.
4
Enter the button number (0 to 63) of the key signal to be
selected using the numeric keypad, and press the ENTER
button.
This selects the key signal.
FRONT
KEY SEPARATE AUTO KEY
INVERT SIDE SELECT
Chapter 6 Input/Output Signal Operations
FRONT
/BACK
(Continued)
6-9