Sony BZDM-7020 User Manual page 285

Deleting snapshots – F3 (DELETE)
Use the following procedure.
1
Press F3 (DELETE).
2
Use the numeric keypad to enter the first register number
which you want to delete, and press the ENTER button.
Alternatively click the cursor on the required number on the
screen.
3
Use the numeric keypad to enter the last register number
which you want to delete, and press the ENTER button.
Alternatively click the cursor on the required number on the
screen.
To delete a single snapshot, press the ENTER button without
entering a number.
This deletes all snapshots in the specified range.
Copying snapshots – F4 (COPY)
Use the following procedure.
Note
• The following operation destroys the existing contents of the
destination registers.
• If a destination register is locked, it is not possible to copy to it.
1
Press F4 (COPY).
2
Use the numeric keypad to enter the first register number
which you want to copy. Alternatively click the cursor on the
required number on the screen.
3
Use the numeric keypad to enter the last register number
which you want to copy. Alternatively click the cursor on the
required number on the screen. To copy a single snapshot,
press the ENTER button without entering a number.
4
Use the numeric keypad to enter the number of the first
destination register. Alternatively click the cursor on the
required number on the screen.
This copies the block of snapshots in the specified range.
Chapter 8 Effect Utilities
8-15