Video Signal And Key Signal Settings (When Not Using A Source Selector) – 51 To 54; Front Video Settings - 51 - Sony BZDM-7020 User Manual

Video Signal and Key Signal Settings
(When Not Using a Source Selector) – 51 to 54
Front
Front Video Settings – 51
Selecting the front video signal
6-4
Chapter 6 Input/Output Signal Operations
When not using a source selector (see page 10-19), select the
video and key signals for each of the front and back of the image.
The following figure illustrates the conceptual front and reverse, or
back, sides of the image.
Conceptual front and back sides
In the IN/OUT menu, press F1 (FRONT VIDEO) to display the
FRONT VIDEO menu.
SIGNAL INPUT FORMAT
FRONT VIDEO menu soft key indications
The following is a typical operation carried out in this menu.
This process involves selecting the video signal for the front of the
image, and making the other necessary settings.
Use the following procedure.
1
Press F1 (SIGNAL), to select "Digital" or "Analog".
2
Press F2 (INPUT), to select "A" or "B".
These "A" and "B" signals correspond to the input connectors
on the rear panel of the processor.
Back
TBC SEPARATE
CENTER SIDE