Sony BZDM-7020 User Manual page 181

Adjusting the position and size of the ripple pattern
Adjust the parameters for the following items.
Item Setting
"Mod Nature of the
Radial" radial modulation
"Mod Nature of the
Angular" angular
modulation
"Position" Position of the
center of the
ripple pattern
"Radial"
Mode and direction of modulation
Knob adjustments of parameters
Left ("Amp): amplitude and direction of the
ripples (0 to 100%)
Center ("Freq): degree of fineness of the
ripples (0 to 100%)
Right ("Sped"): Direction and speed of
wave motion (–100 to +100%)
(When F3 ("LOCK") is on)
Right ("Ofst"): phase offset and direction
of the ripples (–16 to +16)
Left ("Amp): amplitude and direction of the
ripples (0 to 100%)
Center ("Freq): degree of fineness of the
ripples (0 to 100%)
Right ("Sped"): Direction and speed of
wave motion (–100 to +100%)
(When F3 ("LOCK") is on)
Right ("Ofst"): phase offset and direction
of the ripples (–8 to +8)
Left ("X"): x-coordinate of center of ripple
pattern (–4 to +4)
Center ("Y"): y-coordinate of center of
ripple pattern (–3 to +3)
"Angular"
Chapter 5 Special Effects Operations
5-97