Sony BZDM-7020 User Manual page 226

Selecting Input/Output Operations – 50
Top Menu Display When Not Using a Source Selector
Selection operation
6-2
Chapter 6 Input/Output Signal Operations
Here, input/output operations refer to the selection of the video and
key signals used by the DME-7000, and also to the method used
for interpolating video and key signals.
The operations in the IN/OUT top menu depend on whether or not
you are using a source selector (switcher, BVS/DVS-V1201,
BKDM-5080, etc.).
Before carrying out the following operations, make the settings to
select whether a source selector is connected and if so set the type
appropriately.
For details of the source selector settings, see page 10-19.
When not using a source selector (when the "A/B" item is selected
in the SOURCE SELECTOR menu), the IN/OUT menu soft key
indications appear as follows.
51
52 53
FRONT
FRONT BACK
VIDEO
KEY VIDEO
IN/OUT menu soft key indications (When not using a source selector)
F7 (EXT VIDEO IN/OUT) is only effective in component mode
when the BKDM-3050 option is installed.
Press the required function key as shown in the following table to
select the required menu.
Function key
F1 (FRONT VIDEO)
F2 (FRONT KEY)
F3 (BACK VIDEO)
F4 (BACK KEY)
F5 (INPUT INVERT)
F6 (INTERPOLATION)
F7 (EXT VIDEO IN/OUT) Make external video input settings. 6-14
54 55 56
BACK INPUT INTERPO-
KEY INVERT LATION
Function
Select video signal for the front
side of the image.
Select key signal for the front side
of the image.
Select video signal for the reverse
side of the image.
Select key signal for the reverse
side of the image.
Invert the input signal.
Select method of interpolation.
57
EXT VIDEO
IN/OUT
See page
6-4
6-6
6-8
6-8
6-11
6-12