Signal Processing Settings - 716; Signal Processing Settings 2 – 717 - Sony BZDM-7020 User Manual

Signal Processing Settings 2 – 717
This menu selects settings for signal processing within the DME-
7000.
With the second set of soft key indications shown in the SETUP &
DIAG menu, press F7 (PROCESS CTRL 2) to display the
PROCESS CONTROL 2 menu.
717 PROCESS CONTROL 2
•
Chroma Process Field
•
Wrap Around Off
CHROMA WRAP
PROCESS AROUND
PROCESS CONTROL 2 menu
The following are some of the operations carried out in this menu.
Selecting the interpolation processing for chrominance
signals – F1 (CHROMA PROCESS)
If you have set the method of interpolation for video signals to
"Adpt Y" in the INTERPOLATION menu (see page 6-12), press
F1 (CHROMA PROCESS) to select the method of processing the
chrominance signal.
Field: the chrominance signal is processed in field units.
Y motion: the chrominance signal is processed adaptively,
depending on the movement detected in the luminance signal.
Selecting "Y motion" reduces vertical blur when the image is
enlarged, and gives a clearer picture. On the other hand, in an
image with a static luminance signal, no adaptive processing is
carried out, and therefore parts of the image with movement
on the chrominance signal may have double images or striped
patterns.
Enabling or disabling virtual images – F2 (WRAP
AROUND)
If you apply an extreme perspective effect, it is possible for parts
of the image to be behind the notional viewpoint: these are called
virtual images. Press F2 (WRAP AROUND) to toggle on and off
the display of virtual images.
•
Y motion
•
On
Chapter 10 Setup Operations
E G 1 2 3 4 R
10-35