Memory Recall; Memory Recall Selection - 500 - Sony BZDM-7020 User Manual

Memory Recall

Memory Recall Selection – 500
Top Menu Display
Selection operation
8-32
Chapter 8 Effect Utilities
"Memory recall" refers to a function whereby registers are
assigned to rows of buttons shown on the menu screen (this
display is referred to as the "memory recall panel"), and it is
possible to recall effects by a button operation.
The memory recall function is selected from the MEMORY
RECALL menu.
501 501
RECALL RECALL
PANEL SETUP
MEMORY RECALL menu soft key indications
Press the required function key as shown in the following table to
select the function required.
Function key
F1 (RECALL PANEL) Use the memory recall panel to recall
an effect.
F2 (RECALL SETUP) Carry out button assignments to the
memory recall panel and select the
mode in which an effect is recalled.
Recalling registers from a DVS-6000/6000C
You can recall effects held in registers on the DME-7000 from a
DVS-6000/6000C, using the SHOT BOX function.
To use this function, the DVS-6000/6000C must have the BKDS-
6050 key frame control panel installed, and a software version of
2.00 or later. A 9-pin remote control cable (supplied with the
BKDS-6050) must be used to connect the switcher control panel
(BKDS-6010) to the DME-7000 processor unit.
For details of the connections, refer to the DME-3000/7000
Operation Manual.
Function
8-33
8-35
See page