Sony BZDM-7020 User Manual page 276

Register Utilities
8-6
Chapter 8 Effect Utilities
Merging the contents of a specified register on the end
of the currently recalled register – F3 (MERGE)
Use the following procedure.
1
Press F3 (MERGE).
The legend "MERGE" appears in the numeric keypad area.
2
Enter the number of the register whose contents are to be
appended to the contents of the currently recalled register
using the numeric keypad, and press the ENTER button.
Alternatively, click on the register number displayed on the
screen, using the mouse.
This merges the contents of the two registers in a temporary
register.
To store the merged contents of the two registers in the
currently recalled register, proceed to step 3.
3
Carry out one of the following operations.
• Press the STORE EFF button in the key frame operation
section.
• Recall another register.
• Save to disk.
In this case the maximum number of key frames that can be
written is 99.
Swapping the contents of two registers – F4 (SWAP)
Use the following procedure.
1
Press F4 (SWAP).
The legend "SWAP" appears in the numeric keypad area.
2
Enter the number of one of the registers whose contents are to
be swapped using the numeric keypad, and press the ENTER
button. Alternatively, click on the register number displayed
on the screen, using the mouse.
The entered register number appears in the numeric keypad
area followed by a dash. (e.g. "SWAP 12 –")