Sony BZDM-7020 User Manual page 316

Key Frame Effect Timeline Status Display – 610
9-10
Chapter 9 Status Displays
Clearing the pause setting
Stop the effect at the currently set pause position, and press F3
(PAUSE).
This clears the pause setting.
Setting a delay – F4 (DELAY)
This sets a delay from the time at which you carry out the effect
execution operation to the time at which the execution actually
starts.
1
Select the channel or channels to which the setting is to apply.
2
Press F4 (DELAY).
3
Enter the delay value (seconds.frames) from the numeric
keypad, and press the ENTER button.
This sets the entered value as the delay.
Copying a key frame – F5 (COPY TO PASTE BUFFER)
and F6 (PASTE AFTER)
These copy a key frame from one position to another.
1
Select the channel or channels to which the operation is to
apply.
2
Stop the effect on the source key frame to be copied.
3
Press F5 (COPY TO PASTE BUFFER).
4
Stop the effect at the position to which you wish to copy the
key frame.
5
Press F6 (PASTE AFTER).
This copies the key frame.