Sony BZDM-7020 User Manual page 134

Freeze and Afterimage Effects
5-50
Chapter 5 Special Effects Operations
Using a "color mix" for the afterimage part – F4
(SOURCE TYPE), F7 (COLOR MIX) "MIX"
After pressing F4 (SOURCE TYPE) and selecting "Mix", the soft
key indications change as follows.
RECUR TRAIL TRAIL
COLOR TYPE
Soft key indications when "MIX" is selected
Press F7 (COLOR MIX) to display the COLOR MIX menu, and
set the "Color Mix" parameters.
For details of the settings, see the section "COLOR MIX Settings"
(page 5-38).
Using random colors for the afterimage part – F4
(SOURCE TYPE), F5 (RANDOM PATTERN) "RANDOM"
After pressing F4 (SOURCE TYPE) and selecting "RANDOM",
the soft key indications change as follows.
RECUR TRAIL TRAIL
COLOR TYPE
Soft key indications when "RANDOM" is selected
Use the following procedure to make the random color settings.
1
Press F5 (RANDOM PATTERN) and select one of random
patterns 1 to 3.
2
Set the Color Gain parameters.
• Left knob ("Lum"): set the random color luminance (0 to
100%)
• Center knob ("Sat"): set the random color saturation (0 to
100%)
3
Select the Tile Size parameters.
• Left knob ("H"): random pattern tile size horizontally (0 to
100%)
• Center knob ("V"): random pattern tile size vertically (0 to
100%)
• Right knob ("All"): random pattern tile size both
horizontally and vertically (***)
SOURCE
TYPE
SOURCE RANDOM
TYPE PATTERN
17 22.2
COLOR DUST
MIX MODIFY
22.2
DUST
MODIFY