Freze Button Settings - 705 - Sony BZDM-7020 User Manual

FREZE Button Settings – 705
This menu controls the function of the FREZE button on the
control panel.
With the first set of soft key indications shown in the SETUP &
DIAG menu, press F5 (FREEZE BUTTON) to display the
FREEZE BUTTON menu.
705 FREEZE BUTTON
•
Video Timing Frame
•
Key Timing Frame
•
Control Video & Key
•
Freeze Button Enable
VIDEO KEY CONTROL
TIMING TIMING
FREEZE BUTTON menu
The following is a typical operation carried out in this menu.
Setting up the FREZE button function – F1 (VIDEO
TIMING) to F3 (CONTROL)
1
Press F3 (CONTROL), and select the signal or signals to
which the freeze function applies.
Pressing F3 cycles through the following possibilities.
Video & key: both video and key input signals
Video only: video input signal
Key only: key input signal
2
Press F1 (VIDEO TIMING) to select the freeze timing for the
video signal.
Pressing F1 cycles through the following possibilities.
Frame: freeze one frame.
Field 1: freeze field 1.
Field 2: freeze field 2.
3
Press F2 (KEY TIMING) to select the freeze timing for the
key signal.
The settings are the same as in step 2.
• •
Field 1 Field 2
• •
Field 1 Field 2
• •
Video only Key only
•
Disable
FREEZE
BUTTON
Chapter 10 Setup Operations
E G 1 2 3 4 R
10-15