Selecting a progressively changing hue for the
afterimage part – F4 (SOURCE TYPE) "HUE ROT", F5
(HUE RANGE), F6 (HUE PATH), and F7 (RANDOM)
After pressing F4 (SOURCE TYPE) and selecting "HUE ROT",
the soft key indications change as follows.
RECUR
TRAIL
TRAIL
COLOR
TYPE
Soft key indications when "HUE ROT" is selected
Use the following procedure to make the settings for the
progressively changing hue.
1
Press F3 (TRAIL TYPE) and select "Hue Rot", then set the
following parameters.
• Left knob ("Lum"): luminance (0 to 100%)
• Center knob ("Sat"): saturation (0 to 100%)
• Right knob ("Sped"): degree of change of the hue for each
frame (–12 to +12˚)
2
Press F5 (HUE RANGE), turning it on, and adjust the
parameters for the hue variation range.
• Left knob ("Cntr"): center of the hue variation range (0 to
359.99˚)
• Center knob ("Rang"): hue variation range (0 to 180˚)
• Right knob ("Step"): degree of change of the hue (0 to
100%)
3
Press F6 (HUE PATH) and select the behavior when the
varying hue reaches the end of its range.
Modulo: return to the other end of the range, and recycle.
Swing: reverse direction, thus carrying out a reciprocating
variation.
SOURCE
HUE
HUE
TYPE
RANGE
PATH
Chapter 5 Special Effects Operations
22.2
DUST
MODIFY
5-49