Sony BZDM-7020 User Manual page 223

Applying modulation to the lighting pattern
Use the following procedure.
1
Align the cursor with "H Modulation", and adjust the
following parameters.
• Left knob ("Amp): amplitude of the horizontal modulation
(0 to 100%)
• Center knob ("Freq): frequency of the horizontal modulation
(0 to 100%)
• Right knob ("Sped"): speed of the horizontal modulation
flow (–100 to +100%)
2
To apply stationary horizontal modulation, press F5 (H
LOCK), turning it on, and adjust the following parameters.
(In the "H Modulation" parameters, "Sped" changes to
"Ofst".)
• Right knob ("Ofst"): offset of horizontal modulation (–100 to
+100%)
3
Align the cursor with "V Modulation", and adjust the
following parameters.
• Left knob ("Amp): amplitude of the vertical modulation (0
to 100%)
• Center knob ("Freq): frequency of the vertical modulation (0
to 100%)
• Right knob ("Sped"): speed of of the vertical modulation
flow (–100 to +100%)
4
To apply stationary vertical modulation, press F6 (V LOCK),
turning it on, and adjust the following parameters.
(In the "V Modulation" parameters, "Sped" changes to
"Ofst".)
• Right knob ("Ofst"): offset of vertical modulation (–100 to
+100%)
Chapter 5 Special Effects Operations
5-139