Sony BZDM-7020 User Manual page 237

Selecting the interpolation method for each signal.
Selecting the pixel count for interpolation processing
• To change the setting for the front video signal, press F1
(FRONT VIDEO).
• To change the setting for the front key signal, press F2 (FRONT
KEY).
• To change the setting for the back video signal, press F3 (BACK
VIDEO).
• To change the setting for the back key signal, press F4 (BACK
KEY).
Pressing F1 or F3 cycles the corresponding setting through Adpt
Y/C, Adpt Y, Frame, and Field, in sequence.
Pressing F2 or F4 cycles the corresponding setting through
Adaptive, Frame, and Field, in sequence.
Press F8 (INTERPO TYPE) to toggle the pixel count for
interpolation processing between "Multi" (8 × 8) and "Linear" (2 ×
2).
Multi: Interpolation processing is carried out for an 8 × 8 pixel
count. This leads to higher image quality, and is therefore the
mode for normal use.
Linear: Interpolation processing is carried out for an 2 × 2 pixel
count. Use this mode only when it is necessary to emulate
DME-3000 image quality.
Chapter 6 Input/Output Signal Operations
6-13