Sony BZDM-7020 User Manual page 139

3
Adjust the "Decay" parameters as follows.
• Left knob ("Decy"): degree of blurring of video signal (0 to
100%)
• Right knob ("Dust"): degree of leaving stardust trails of
afterimage (0 to 100%)
Applying modulation to "WIND" – F2 (MODULATION)
Use the following procedure.
1
Press F2 (MODULATION), turning it on.
2
Adjust the modulation parameters.
Item Setting
"Modulation H" Apply horizontal
modulation
"Modulation V" Apply vertical
modulation
The following operations are also possible in the same
way as for a trail
• Defocusing the afterimage part – F3 (DEFOCUS)
• Deleting the afterimage remaining in memory at each key frame
– F4 (RESUME RECUR)
• Selecting the stroboscope timing – F6 (TIMING)
• Applying a different color to the trail – F7 (TRAIL SOURCE)
• Modifying the shape and size of the dust – F8 (DUST MODIFY)
For details of the operations, see the section "TRAIL Settings"
(page 5-52).
Knob adjustments of parameters
Left ("Amp): amplitude (0 to 100%)
Center ("Freq): frequency (0 to
100%)
Right ("Sped"): speed of modulation
flow (–100 to +100%)
Chapter 5 Special Effects Operations
5-55