Moving In The Target Coordinate Frame - Sony BZDM-7020 User Manual

Moving the Image

Moving in the Target Coordinate Frame

Procedure
Moving along the x-axis
TRGT button
LOC XYZ button
(or LOC SIZE button)
3-10
Chapter 3 Three-Dimensional Transformation
To move the image in the target coordinate frame, use the
following procedure in the transformation operation section.
1
In the function allocation section, press the TRGT button,
turning it on.
2
In the transformation mode selection section, press the LOC
XYZ button, turning it on.
If you wish to move the image in the x- and y-directions only,
pressing the LOC SIZE button has the same effect.
3
Move the trackball to move the image in the x- and y-
directions.
Turn the Z-ring to move the image in the z-direction.
RUN
CURSR
CTRL
SRCE TRGT
ASP
LOC LOC
SKEW
SIZE XYZ
PERS
AXIS
ORTHG ROT
LOC
X Y Z
VELO
CTR
HOLD
SEL/FINE
Control panel operation Video change