Displaying a reduced graphics display (reduced wire
frame) – F5 (REDUCE)
When GRAPHIC MODE is set to "User Defined", this feature
provides a reduced display of the graphics screen, which allows
you to see even those portions of the wire frame overflowing the
active, or normal viewing, screen area. Thus you can check the
current position of the wire frame (and therefore that of the whole
image), relative to the active screen area, which will be indicated
by a box on a reduced scale.
This box represents
the active screen
area.
You can locate the image more accurately by displaying a grid
pattern over the active screen area.
Use the following procedure to control the display of a reduced
wire frame.
1
Press F5 (REDUCE), turning it on.
2
Turn the left knob ("Size") to adjust the reduction rate. (0 to
1)
Turning the knob counterclockwise increases the reduction
rate.
Reduced wire frame
Chapter 5 Special Effects Operations
Wire frame
5-121