Creating, Moving, and Rotating a Slab
Moving and rotating the cube
Use the following procedure.
1
In the QUICK ENABLER menu, click "AUTO CUBE", or in
the 3D TRANSFORM menu, use F6 (AUTO CUBE) to set
AUTO CUBE to "ON".
This enables the auto cube function.
2
Select the global channel.
3
Use the trackball and Z-ring to manipulate the cube.
This example shows how to create, move, and rotate a slab of
depth 4.00, width 6.00, and height 3.00 units.
3.00
CH 3
6.00
CH 1
CH 2
4.00
Chapter 5 Special Effects Operations
5-9