Sony BZDM-7020 User Manual page 82

Parameter Setting Screens
Copying parameters
4-16
Chapter 4 Menu Operations
Resetting all parameters in a single menu
To reset all parameters in the menu displayed in the active window
to their default values, use the following procedure, with either the
control panel or the mouse.
1
Click on the "R" in the upper right corner of the menu, or hold
down the SHIFT button and press the CLR WORK BUFF
button.
A pop-up window appears as follows.
CANCEL ( EXIT )
2
To carry out the reset, click on the "OK" in the pop-up
window, or press the ENTER button.
To cancel the operation, click on the "CANCEL" in the pop-
up window, or press the EXIT button, or press the right mouse
button.
It is possible to copy sets of parameter values from one menu to
another. This function is useful, for example, when you wish to
make two color mattes have exactly the same settings.
As an example, use the following procedure to copy the settings
for the "SOURCE MIX 1" item in the BKGD menu to the
BORDER menu.
Using the control panel
1
In the BKGD menu, use the ˘ and ≥ buttons to display the
"SOURCE MIX 1" line in green.
2
Holding down the SHIFT button, press the ENTER button.
The message "Copied" appears, and this saves the three
parameter values in a buffer.
3
Access the BORDER menu, and use the ˘ and ≥ buttons to
display the "SOURCE MIX 1" line in green.
Parameter RESET?
OK ( ENTER )