Sony BZDM-7020 User Manual page 101

Selecting the border color – F2 (FLAT COLOR) and F3
(HUE ROT)
These border color selections are the same as for the background.
For details of the operations required, see the section "BKGD
settings" (page 5-13).
Softening the border – F6 (BORDER SOFT)
Use the following procedure.
1
Press F6 (BORDER SOFT), turning it on.
2
Adjust the parameters as follows.
• Left knob ("Inner"): degree of softening of inner edge (0 to
100%)
• Center knob ("Outr"): degree of softening of outer edge (0 to
100%)
• Right knob ("All"): degree of softening of inner and outer
edges (***)
The Center knob ("Outr") is effective only when the BKDM-
7060 option is installed.
Setting the size of frame at which the border is applied –
F7 (CROP)
To set the size, position, and other parameters of the frame, press
F7 (CROP). The CROP menu appears.
For details see the following section "CROP Settings".
Chapter 5 Special Effects Operations
5-17