Rotating The Image; Rotating In The Source Coordinate Frame - Sony BZDM-7020 User Manual

Rotating the Image

Rotating in the Source Coordinate Frame

Procedure
Rotating about the y-axis
SRCE button
ROT button
3-12
Chapter 3 Three-Dimensional Transformation
This section describes how to rotate the image in either the source
or target coordinate frame.
When creating an effect involving continuous rotation of the
image, use the spin function to specify the number of rotations.
For details of the spin function, see pages 3-27 and 9-3.
To rotate the image in the source coordinate frame, use the
following procedure in the transformation operation section.
1
In the function allocation section, press the SRCE button,
turning it on.
2
In the transformation mode selection section, press the ROT
button, turning it on.
3
Move the trackball to rotate the image about the x- and y-axes.
Turn the Z-ring to rotate the image about the z-axis.
RUN
CURSR
CTRL
SRCE TRGT
ASP
LOC LOC
SKEW
SIZE XYZ
PERS
AXIS
ORTHG ROT
LOC
X Y Z
VELO
CTR
HOLD
SEL/FINE
Control panel operation Video change