Changing The Perspective Of The Image - Sony BZDM-7020 User Manual

Changing the Perspective of the Image

Procedure
Moving the vanishing point in the x-direction
TRGT button
ASP/SKEW/PERS
button
By moving the virtual viewpoint of the image along the z-axis (in
the target coordinate frame), you can change the apparent
perspective of the image.
To change the perspective of the image, use the following
procedure in the transformation operation section.
1
In the function allocation section, press the TRGT button,
turning it on.
2
In the transformation mode selection section, press the ASP/
SKEW/PERS button, turning it on.
3
Use the trackball to move the vanishing point in the x- and y-
directions.
Turn the Z-ring to change the perspective in the z-direction.
RUN
CURSR
CTRL
SRCE TRGT
ASP
LOC LOC
SKEW
SIZE XYZ
PERS
AXIS
ORTHG ROT
LOC
X Y Z
VELO
CTR
HOLD
SEL/FINE
Control panel operation Change in vanishing
point position
Chapter 3 Three-Dimensional Transformation
3-25