Basic Operations For Path Settings - 61 To 68 - Sony BZDM-7020 User Manual

Path Settings
Basic Operations for Path Settings – 61 to 68
Making the same path setting for all items
7-20
Chapter 7 Key Frame Effects
To make the same path setting for all items, use the following
procedure in the menu 61 (PATH ALL menu). When using the
menus 62 to 68, follow the same procedure after making the
necessary adjustments.
1
Stop the effect on the key frame for which you wish to make
the path setting.
This makes a path setting which affects the interpolation from
this key frame to the next key frame.
2
In the PATH menu, press F1 (ALL).
The PATH ALL menu appears.
PREVIOUS
PATH ALL menu soft key indications
3
Press F3 (PREVIOUS) or F4 (NEXT) to select the path type.
Pressing F4 cycles through the following possibilities: OFF
n STEP n LINEAR n S-curve n Spline curve, and
pressing F3 cycles through in the reverse direction. The spline
curve setting, however, is only valid for the "TRANSFORM"
item.
The different path settings are indicated on the menu by the
following iconic representations.
(OFF): Make no change as the effect proceeds.
(STEP): Change stepwise at each key frame. In other
words, there is no interpolation in the interval between
key frames.
(LINEAR): Interpolate linearly between key frames. This
maintains a constant speed of movement.
(S-curve): Accelerate and decelerate around each key
S
frame, so that the speed is maximum at the mid-point
between two key frames.
(Spline curve): Use a spline curve to provide a smooth
interpolation.
NEXT