Effect Run Mode Settings - 71 - Sony BZDM-7020 User Manual

Effect Run Mode Settings – 71
7-30
Chapter 7 Key Frame Effects
The following are some of the operations carried out in this menu.
Making an effect loop – F1 (LOOP)
Press F1 (LOOP), turning it on.
Setting the loop mode – F2 (LOOP END TIME)
When looping effects in more than one channel, press F2 (LOOP
END TIME) to select the mode for timing between channels.
Same End: All channels loop in time with the longest effect.
Independent: The channels loop independently.
Ignoring the current delegation and running the effect
on all channels simultaneously – F3 (RUN TOGETHER)
To run the effects in currently unselected channels also together,
press F3 (RUN TOGETHER), turning it on.
Holding cross-point selections from before the effect
execution – F6 (XPOINT HOLD)
Press F6 (XPOINT HOLD), turning the "Xpoint Hold" setting to
"On".
Setting the default key frame duration – F7 (DEFAULT
KF DUR)
This setting determines the key frame duration given to all newly-
inserted key frames when the CNST DUR button is off.
Use the following procedure.
1
Press F7 (DEFAULT KF DUR), turning it on.
2
Enter the number of frames in the range 1 to 255 using the
numeric keypad, and press the ENTER button.