Sony BZDM-7020 User Manual page 297

Unlocking a file – UNLOCK
Writing a label on a disk – LABEL
Use the following procedure to write-enable (unlock) a file on a
floppy disk.
1
Insert the floppy disk containing the file to be write-enabled in
the floppy disk drive.
2
Press F2 (FUNCTION), to display "UNLOCK" in green.
The indicator to the left of the "UNLOCK" item lights, and a
message appears as follows.
Select files and press [Cancel]/[OK]
3
Now carry out steps 4 and 6 in the section "Loading a file –
LOAD" (page 8-20).
Use the following procedure to write a label on a disk.
1
Insert the floppy disk on which the label is to be written in the
floppy disk drive.
2
Press F2 (FUNCTION), to display "LABEL" in green.
The indicator to the left of the "LABEL" item lights, and a
message appears as follows. (The soft key indication for F8
changes to "OK.")
Input LABEL name and press [Cancel]/[OK]
(Continued)
Chapter 8 Effect Utilities
8-27