Parameter Settings Which Can Be Included In Key Frames - Sony BZDM-7020 User Manual

Generating and Editing Key Frames
Parameter Settings Which Can Be Included in Key
Frames
Parameters which cannot be included
Menu name and (page)
number
BKGD – 11
FRONT VIDEO – 51,
FRONT KEY – 52,
BACK VIDEO – 53,
BACK KEY – 54
EFFECT RUN MODE – 71 Default KF Dur,
7-8
Chapter 7 Key Frame Effects
6
Press the BEFR/INSRT button.
This inserts the current key frame (key frame 2) after key
frame 1.
Repeat steps 5 and 6 to create all the necessary key frames.
When inserting key frames, the key frame duration (that is, the
time from one key frame to the next) is normally set to 1 second.
It is also possible to change this value if required.
For details see the section "Time Settings" (page 7-16).
Some of the parameter settings on the control panel can be
included in key frames, and others cannot.
Basically, the settings in setup menus (those with page numbers
7xx) cannot be included, and the remainder of the settings can be.
There are, however, exceptions as listed in the following table.
Parameters which can be included
Menu name and (page)
Parameters
number
Super Black Level PROCESS CONTROL
2 – 717
Format,
TBC center,
Phase
Xpoint Hold (on/off
setting)
Parameters
Wrap Around (on/off
setting)