Sony BZDM-7020 User Manual page 27

AXIS LOC (location) button: When
this button is lit, the axis of rotation
of the image is moved, in the x- and
y-directions by the trackball, and in
the z-direction by the Z-ring.
ROT (rotation) button: The trackball
rotates the image about the x- and y-
axes, and the Z-ring about the z-
axis.
Pressing this button while holding
down the SHIFT button in the key
frame operation section changes the
three-dimensional parameter display
section of the menu screen to the
TRGT SPIN display or SRCE SPIN
display according to the setting of the
function allocation section. This
enables you to use the spin function.
X, Y, Z buttons: Use these buttons to
restrict the axes affected by
movement of the trackball and Z-ring.
Additionally, when one of these
buttons is lit, the numeric keypad can
be used to input coordinate data for
that axis.
.................................................................................................................................................................................................................................................
1) Using the spin function (page 3-27) in place of the
ROT button enables you to specify the number of
rotations when creating an effect.
1)
CTR (center) button: Pressing this
button changes the current data values
for the trackball or Z-ring positions to
closest system-specified values (i.e.
provides a detent function).
Immediately pressing this button once
more reverts to the system default
values .
VELO (velocity) HOLD button: If you
hold down this button, then move the
trackball or Z-ring, the movement
continue when you release the
trackball or Z-ring as long as you
hold down the button.
2) The rate of movement can be varied in the
TRACK BALL menu (page 10-8).
Chapter 2 Location and Function of Parts
2)
2-5