Sony BZDM-7020 User Manual page 355

Setting the time – F2 (TIME)
To set the time, use the following procedure.
1
Press F2 (TIME).
The current time setting appears in the numeric keypad area.
2
Using the numeric keypad, enter the time in the format
hh.mm.ss, using the 24-hour clock.
For example, to set the time to 13:15 and 20 seconds, enter
13.15.20.
3
Press the ENTER button in the numeric keypad section.
This confirms the time setting on the menu screen.
Selecting 525 lines or 625 lines (component systems
only) – F3 (SIGNAL LINES)
Press F3 (SIGNAL LINES) to select 525 or 625 scan lines
Selecting the screen aspect ratio – F4 (SCREEN)
Press F4 (SCREEN) to select a 4:3 or 16:9 screen aspect ratio.
Chapter 10 Setup Operations
10-37