Color Mattes – 78
8-30
Chapter 8 Effect Utilities
2
Align the cursor with the color matte to copy.
3
Hold down the SEL/FINE button to change the cursor from an
arrow to a square, and use the trackball to move the cursor to
the destination color matte name.
4
Release the SEL/FINE button.
This carries out the copy, and the cursor returns to an arrow
shape.
Copying a color with the mouse
1
Align the cursor with the color matte to copy.
2
Hold down the left mouse button, and drag the cursor to the
destination color matte name, then release the button.
Setting a color matte
1
Use F1 (˘) to F4 (÷) to select the color matte with the
cursor.
The source color matte name changes to green, and its
parameters appear in the "Color Matte" item.
2
Adjust the color parameters.
• Left knob ("Lum"): luminance (0 to 100%)
• Center knob ("Sat"): saturation (0 to 100%)
• Right knob ("Hue"): hue (0 to 359.99˚)
Grabbing a color from video input - F7 (GRAB MARKER)
Notes
• The video signal captured is clipped to 100% luminance and
100% saturation.
• It is not possible to use the color grabber while the beveled edge
or sketch function is on.
• Since the color grabber uses the same memory as the frame
memory (see the next page), using either of these functions
overwrites the memory.