System Settings – 721
10-36
Chapter 10 Setup Operations
This menu makes system settings such as the system clock and
operating mode.
With the third set of soft key indications shown in the SETUP &
DIAG menu, press F1 (SYSTEM) to display the SYSTEM menu.
721 SYSTEM
JAN.15.96
Date
13 :15 : 20
Time
•
Signal Format
Component
•
Signal Lines
525
•
Screen
4 : 3
DATE
TIME
SIGNAL
LINES
F3 (SIGNAL LINES) and F4 (SCREEN) are effective only in a
component system.
The following are some of the operations carried out in this menu.
Setting the date – F1 (DATE)
To set the date, use the following procedure.
1
Press F1 (DATE).
The current date setting appears in the numeric keypad area
(see page 4-5).
2
Using the numeric keypad, enter the date in the American
format as mm.dd.yy.
For example, to set the date to January 15, 1996, enter 1.15.96.
3
Press the ENTER button in the numeric keypad section.
This confirms the date setting on the menu screen.
•
Composite
•
625
•
16 : 9
SCREEN
SYSTEM menu
E
G 1 2 3 4 R