Sony BZDM-7020 User Manual page 298

Disk Utilities
8-28
Chapter 8 Effect Utilities
3
Use either of the following methods to enter the characters of
the label one by one (maximum eleven alphanumeric
characters).
• Click with the cursor on the required character on the on-
screen keyboard.
• Use the control knobs to highlight the required character on
the on-screen keyboard in light blue, and press the SEL/FINE
button.
Left knob ( ): move the light blue highlighted character
horizontally.
Center knob ( ): move the light blue highlighted character
vertically.
Right knob ( ): delete the last input character.
The characters which you select appear in a name input
window.
4
Press F8 (OK) or the ENTER button.
This writes the label on the disk.
To cancel the labeling operation
Press F7 (CANCEL).