Sony BZDM-7020 User Manual page 162

Overall Image Effects
5-78
Chapter 5 Special Effects Operations
2
If necessary, turn the left knob ("Soft") to adjust the softness
of the three-dimensional intersection of the images (0 to
100%).
3
If necessary, adjust the key density.
You can vary the overall depth information, and adjust the
intersection of the images. Press the LOC XYZ button in the
transform mode selection section, turning it on, and turn the Z-
ring.
Notes
• If you press the LOC SIZE button, turning it on, and turn the Z-
ring, the size will change, but not the depth information.
• A "Trail" image formed using a recursive function in the
upstream DME contains depth information, which you can use to
combine three-dimensionally with the downstream image. It is
not, however, possible to combine a downstream "Trail" image
with the upstream image.