Sony BZDM-7020 User Manual page 81

Using a cursor click and the numeric keypad
Resetting parameters to their default values
1
Click on the "Lum" item.
2
Enter the value for the luminance using the numeric keypad.
You can alternatively enter a trim value, that is, the difference
from the current value.
Using the Z-ring
1
Align the cursor on the "Lum" item. (A click is not
necessary.)
2
Turn the Z-ring to adjust the luminance value.
Using the mouse
1
Move the mouse to place the cursor on the "Lum" item.
2
Press the left mouse button, and drag the mouse down.
The cursor is replaced by a bar gauge for the "Lum" value.
3
Drag the mouse to the right or left to increase or decrease the
setting respectively.
For example, to return the "Lum" parameter of the "SOURCE
MIX 1" item in the menu shown on page 4-12 to its default value
you can use either of the following methods.
• Using the control panel: Display the "SOURCE MIX 1" line
in green, then double-click on the corresponding button in the
soft knob specification section of the numeric keypad, the
KNOB LEFT button.
• Using the mouse: Place the cursor on the "Lum" parameter,
then double-click the left mouse button.
Lum 12.34
Bar gauge indicating the "Lum" value
Chapter 4 Menu Operations
4-15