Sony BZDM-7020 User Manual page 123

Selecting the two colors (color 1 and color 2)
Adjust the parameters as follows.
Item Setting
"Color 1" Color for portion
of pattern shown
black
"Color 2" Color for portion
of pattern shown
white
Making fine adjustments to color 1 and color 2 –
F4 (COLOR 1 HUE ROT) and F5 (COLOR 2 HUE ROT)
Use the following procedure.
1
Press F4 (COLOR 1 HUE ROT) or F5 (COLOR 2 HUE
ROT), turning it on.
In the "Color 1" or "Color 2" parameters, the "Hue" indication
changes to "Sped".
2
Turn the right knob ("Sped") to set the angle through which
the hue rotates every frame (–12 to +12°).
Adjusting the mix pattern size and softness
Adjust the "Size & Soft" parameters.
• Left knob ("Size"): pattern size (0 to 100%)
• Center knob ("Soft"): degree of softening of edge (0 to 100%)
Adjusting the position of the mix pattern
Adjust the "Position" parameters. These parameters apply only to
the following patterns: 17 ("X" only), 18 ("Y" only), and 21 to 24.
• Left knob ("X"): horizontal position of center (–8 to +8)
• Center knob ("Y"): vertical position of center (–8 to +8)
Knob adjustments of parameters
Left ("Lum"): luminance (0 to 100%)
Center ("Sat"): saturation (0 to 100%)
Right ("Hue"): hue (0 to 359.99°)
Left ("Lum"): luminance (0 to 100%)
Center ("Sat"): saturation (0 to 100%)
Right ("Hue"): hue (0 to 359.99°)
Chapter 5 Special Effects Operations
5-39