Sony BZDM-7020 User Manual page 253

6
Use one of the following methods to specify the range for
amendment.
• To carry out the amendment from the current key frame to
the end of the effect, no input is necessary. Continue to step
7.
• To specify the range by key frame numbers, input the
starting key frame number, press the ENTER button, input
the ending key frame number, and press the ENTER button.
• To apply the amendment to all key frames, enter a period ".",
and press the ENTER button.
• To apply the amendment to all key frames from a specified
key frame to the end of the effect, input the starting key
frame number, press the ENTER button, enter a period ".",
and press the ENTER button.
7
Press the MOD button.
This carries out the amendment over the specified range of key
frames.
Key frame amendment: absolute and relative changes
When amending a number of key frames together, depending on
the way in which you change the key frame parameter values, the
effect on the other key frames changes.
For example: changing X = 1.0000 to X = 1.5000
• Entering an absolute value using the numeric keypad and
ENTER button or pressing CLR WORK BUFF button: the
values of X in the other key frames all change to the same value
(1.5000 in this example).
• Amending the value using the control knobs, trackball, Z-
ring or numeric keypad and TRIM button or pressing CTR
button: the same difference (+0.5000 in this example) is added
to the values of X in the others.
Chapter 7 Key Frame Effects
7-13