Sony BZDM-7020 User Manual page 131

TRAIL SOURCE Settings – 22.1
Deleting the afterimage remaining in memory at each
key frame – F4 (RESUME RECUR)
Press F4 (RESUME RECUR), turning it on.
Each time the effect passes a key frame, the recursive memory is
cleared, deleting the afterimage.
Setting the timing for leaving afterimages – F6 (TIMING)
Press F6 (TIMING), and select either of the following.
Frame: leave afterimages at frame intervals.
Field: leave afterimages at field intervals.
Applying a different color to the trail – F7 (TRAIL
SOURCE)
Press F7 (TRAIL SOURCE) to display the TRAIL SOURCE
menu, then make the settings.
For details of the settings, see the next section "TRAIL SOURCE
Settings."
You can replace the afterimage part of a recursive effect with a
different video.
In the FREEZE & RECUR menu, press F7 (TRAIL SOURCE) to
display the TRAIL SOURCE menu.
RECUR TRAIL TRAIL
COLOR TYPE
TRAIL SOURCE menu soft key indications
Replacing the afterimage part with a different video – F2
(TRAIL COLOR)
Press F2 (TRAIL COLOR), turning it on.
This replaces the afterimage part of a recursive effect with a
different video.
SOURCE
TYPE
Chapter 5 Special Effects Operations
22.2
DUST
MODIFY
5-47