Floppy Disk Operations - 77 - Sony BZDM-7020 User Manual

Floppy Disk Operations – 77
Disk menu display
Selecting the directory – CHANGE DIR
Saving register contents – SAVE
You can use a floppy disk to store setup data, effect data and
snapshot data.
These different types of data are held in three directories: SETUP,
EFFECT and SNAPSHOT.
In the EFFECT UTILITY menu, press F5 (DISK) to display the
DISK menu.
CHANGE FUNC
DIR TION
DISK menu soft key indications
The following are some of the operations carried out in this menu.
Press F1 (CHANGE DIR) to select the directory.
Pressing F1 cycles through in the following sequence: SETUP n
EFFECT n SNAPSHOT.
Use the following procedure to save the contents of a register to
the floppy disk.
1
Insert the floppy disk on which you wish to save the file in the
floppy disk drive.
Note
Before using a new floppy disk to hold data, it is necessary to
format it.
For details see the section "Formatting a disk" (page 8-22).
CANCEL
SELECT ALL
(Continued)
Chapter 8 Effect Utilities
READ DISK
8-19