Related Manuals for Sony BKSM-T101
Summary of Contents for Sony BKSM-T101
- Page 1 SDDI INPUT BOARD BKSM-T101 INSTALLATION MANUAL 1st Edition Serial No. 10001 and Higher...
- Page 2 ! WARNING This manual is intended for qualified service personnel only. To reduce the risk of electric shock, fire or injury, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so. Refer all servicing to qualified service personnel.
-
Page 3: Table Of Contents
Related manual ......................3 1. Overview .................. 2. Installation 2-1. Installation of Board and Rear Panel ............2-1 2-2. Matching Connector and Cable ..............2-3 2-3. Input and Output Signal of Connector ............2-3 2-4. Internal Indicators ..................2-3 BKSM-T101... -
Page 5: Manual Structure
Manual Structure Purpose of this manual This manual is the installation manual of the BKSM-T101 SDDI Input Board. This manual is intended for use by trained system and service engineers, and describes the information regarding installation. Contents The following is a summary of all the section for understanding the contents of this manual. -
Page 7: Overview
Section 1 Overview The BKSM-T101 is the board which input the MPEG2 4:2:2P@ML component serial digital signal in SDDI format to the encoder board of the DSM-T1/M1. When this board is installed in the DSM-T1/M1, the digital video and audio signals in SDDI format can be input and transmitted. -
Page 9: Installation
(2) Connect the connector on the DIF-51 board to the connector on the ENC board. Make sure that the connector is connected tightly. IN 2 side DIF-51 board IN 1 side Connector IN 2 side IN 1 side ENC board Hole Ejector pin Connector BKSM-T101... - Page 10 (3) Secure the DIF-51 board using the four screws (PWH (2) Secure the SDDI IN rear panel using the four screws 3x6) supplied with the BKSM-T101. (B 3x6) supplied with the BKSM-T101. PWH 3x6 PWH 3x6 SDDI IN rear panel...
-
Page 11: Matching Connector And Cable
BKSM-T101 Matching Connector/Cable Panel indication Connector/cable Sony Part No. SDDI BNC 75 Z, male 1-560-069-11 5C-2V cable *1: It is recommended to use the coaxial cable 5C-2V (Max. 200 meters) of Fujikura America Inc./Fujikura Europe Ltd.(FEL) or the equivalent. - Page 13 The material contained in this manual consists of information that is the property of Sony Corporation and is intended solely for use by the purchasers of the equipment described in this manual. Sony Corporation expressly prohibits the duplication of any portion of this manual or the use thereof for any...
- Page 14 Printed in Japan Sony Corporation BKSM-T101 (SY) E 1997. 1 16 Broadcast Products Company ©1997 3-192-126-01 Published by Broadcast Products Company...
Need help?
Do you have a question about the BKSM-T101 and is the answer not in the manual?
Questions and answers