Sony BZDM-7020 User Manual page 322

Selecting Setup Items – 700
10-4
Chapter 10 Setup Operations
Selecting from the second set of soft key indications
Function key Function
F1 (SOURCE Settings related to a source selector.
SELECTOR)
F2 (INPUT Settings for input signals.
CONTROL)
F3 (AUTO KEY Assign particular key signals
SELECT) automatically to particular video
signals.
F4 (INITIAL CROP) Set initial position of cropping frame.
F5 (OUTPUT Set up output signals.
CONTROL)
F6(PROCESS Select signal processing.
CTRL 1)
F7(PROCESS Select interpolation processing, and
CTRL 2) other settings.
F8 (MORE)
Switch to the third set of soft key
indications, as below.
Selecting from the third set of soft key indications
Function key Function
F1 (SYSTEM) Set system clock and operating mode. 10-36
F2 (SYSTEM Display option boards installed.
CONFIG)
F3 (VERSION) Display the software version for the
processor, the control panel, and the
currently installed option boards.
F4 (INSTALL) Install system software.
F5 (DME LINK) Settings for the DME LINK function.
F6 (SPARE PORT) Select the use for the RS-232C
connector on the control panel.
F7 (COMBINER Select the combiner configuration.
SETUP)
F8 (MORE) Switch to the first set of soft key
indications, as shown on the previous
page.
See page
10-19
10-23
10-27
10-29
10-30
10-32
10-35
—
See page
10-38
10-39
10-40
10-44
10-45
10-46
—