Sony BZDM-7020 User Manual page 257

Setting the effect duration
Maintaining a constant effect duration
3
Press the KF EDIT ENABL button, turning it on.
4
Hold down the SHIFT button and press the KF/DUR EFF
button.
5
Enter the numeric value (seconds and frames) using the
numeric keypad, and press the ENTER button.
For example, to enter 9 seconds 20 frames, enter "9.20".
The maximum value which can be set is 59 seconds 29 frames.
Use the following procedure.
1
Select the active channels and the reference channel.
If a number of channels are active, with different settings for
the effect duration, the following procedure sets them to be the
same.
2
Press the KF EDIT ENABL button, turning it on.
3
Press the KF/DUR EFF button.
4
Enter the numeric value (minutes, seconds and frames) using
the numeric keypad, and press the ENTER button.
For example, to enter 3 minutes 7 seconds 15 frames, enter
"3.7.15". The maximum setting is 9 minutes 59 seconds 29
frames.
If you do not wish a deletion or insertion of a key frame to change
the overall duration of the effect, first press the CNST DUR button
in the duration setting section, turning it on.
In this state, when a key frame is inserted or deleted, the positions
of the other key frames on the time axis do not change, and thus
the total duration of the effect also remains unchanged.
Chapter 7 Key Frame Effects
7-17