Target Lighting Settings - 303 - Sony BZDM-7020 User Manual

TARGET LIGHTING Settings – 303
In the LIGHT EFFECT menu, press F3 (TARGET LIGHTING) to
display the TARGET LIGHTING menu.
TARGET PATTERN TRACK
LIGHT BALL
TARGET LIGHTING menu soft key indications
The following are some of the operations carried out in this menu.
Switching the lighting on and off – F1 (TARGET LIGHT)
Press F1 (TARGET LIGHT), turning it on.
When this is set to "ON", the lighting settings are enabled.
Selecting the lighting pattern – F2 (PATTERN)
Press F2 (PATTERN) and select the lighting pattern.
Circle: circular
Box: rectangular (bar)
Wipe: wipe pattern
To select a wipe pattern as the lighting pattern requires the
BKDM-3040 option.
Setting the lighting position and size
Use the trackball and Z-ring or the soft knobs to adjust the lighting
position and size.
For details of the operations, see the section "SPOTLIGHTING
Settings" (page 5-129).
Setting the strength and edge softness of the lighting
For details of the operations, see the section "SPOTLIGHTING
Settings" (page 5-129).
303.1
MIX ROTA- PATTERN
MODE TION MODIFY
Chapter 5 Special Effects Operations
303.2 16.3
LIGHT WIPE
COLOR PATTERN
5-137