Sony BZDM-7020 User Manual page 222

Lighting
Adjusting the lighting shape – 303.1
5-138
Chapter 5 Special Effects Operations
Adjusting the aspect ratio and rotation of the lighting
pattern – F5 (ROTATION)
Use the following procedure.
1
Align the cursor with "Aspect & Angle", and adjust the
following parameters.
• Left knob ("Asp"): aspect ratio (–100 to +100%)
• Right knob ("Angl"): direction and amount of rotation (–8 to
+8)
2
To rotate the pattern at a constant rate, press F5
(ROTATION), turning it on, and adjust the following
parameters.
(In the "Aspect & Angle" parameters, "Angl" changes to
"Sped".)
• Right knob ("Sped"): direction and speed of rotation (–100 to
+100%)
You can adjust the aspect ratio of the lighting pattern, or apply
rotation, modulation, and so forth.
In the TARGET LIGHTING menu, press F6 (PATTERN
MODIFY) to display the PATTERN MODIFY menu.
LIGHT AREA
INVERT
PATTERN MODIFY menu soft key indications
Inverting the lighted area – F1 (LIGHT INVERT)
Press F1 (LIGHT INVERT), turning it on.
This changes lighting to illuminate only the area outside the
lighting pattern.
Selecting where the light impinges – F2 (AREA)
Press F2 (AREA) and select where the light impinges. The
possible selections are: the image only, the background only, or
both image and background portions.
H LOCK V LOCK
303.2
LIGHT
COLOR