Sony BZDM-7020 User Manual page 215

Adjusting the spotlight color and using an external video signal
for the spotlight pattern – 302.1
Rotating the spotlight pattern – F4 (ROTATION)
Use the following procedure.
1
Press F4 (ROTATION), turning it on.
The "Angl" indication in the "Aspect & Angle" parameters
changes to "Sped".
2
Turn the right knob ("Sped") to set the rotation rate per frame.
(–100 to +100%)
Inverting the spotlight area – F5 (SPOT INVERT)
Press F5 (SPOT INVERT), turning it on.
The sense of the spotlight pattern is reversed, so that the area
outside the spotlight pattern is illuminated and the area inside the
spotlight pattern is not illuminated.
To return to the original state, press F5 (SPOT INVERT) again,
turning it off.
To adjust the spotlight color or use an external video signal for the
spotlight pattern, use the SPOTLIGHT MODIFY 1 menu.
Displaying the SPOTLIGHT MODIFY 1 menu – F6 (SPOT
MOD1)
Press F6 (SPOT MOD1).
The SPOTLIGHT MODIFY 1 menu appears.
SPOT- PATTERN TRACK
LIGHT NO. BALL
SPOTLIGHT MODIFY 1 menu soft key indications
In this menu, F1 (SPOTLIGHT), F2 (PATTERN NO.), and F3
(TRACK BALL) functions, and the adjustments of the "Position
& Size" and "Intensity & Soft" parameters are the same as in the
SPOTLIGHTING menu.
From this menu, pressing F8 (SPOT PATTERN) moves to the
SPOT PATTERN menu.
FLAT HUE MIX
COLOR ROT COLOR
Chapter 5 Special Effects Operations
302.3
EXT SPOT
VIDEO PATTERN
5-131