Sony BZDM-7020 User Manual page 161

Mixing images – F4 (MIX)
To mix the selected channel with the upstream image, use the
following procedure.
1
Press F4 (MIX), turning it on.
This mixes the two images.
2
If necessary, turn the center knob ("Mix") to adjust the mix
ratio of the superimposed image (0 to 100%).
3
If necessary, adjust the key density.
Combining images three-dimensionally – F5 (DEPTH)
To combine the selected channel three-dimensionally with the
upstream image, use the following procedure.
1
Press F5 (DEPTH), turning it on.
This combines the two images three-dimensionally.
If the two images do not intersect
Select the channel of the image you wish to move in the
channel selection section, and move it using the trackball and
Z-ring until the two images intersect.
(Continued)
Chapter 5 Special Effects Operations
5-77