Sony BZDM-7020 User Manual page 291

3
Press F2 (FUNCTION), to display "LOAD" in green.
The indicator to the left of the "LOAD" item lights, and a
message appears as follows.
Select files and press [Cancel]/[OK]
4
Use F3 (˘) or F4 (≥) to display the required file number in
green, and then press F5 (SELECT). Alternatively, click on
the register number displayed on the screen, using the mouse.
To specify all reghisters, press F6 (ALL).
A blue bar appears attached to the file number, and the soft
key indication for F8 changes to "OK".
Repeat step 4 as necessary, if you wish to load more than one
file.
5
To make the destination register numbers different from the
file numbers on the disk, use the numeric keypad to enter the
register number for the first file in the range.
To load with the register numbers the same as the file
numbers, no entry is required.
6
To confirm the load press F8 (OK). To abort the load, press
F7 (CANCEL).
This loads the register or registers with the same file number
or numbers.
Chapter 8 Effect Utilities
8-21