Sony BZDM-7020 User Manual page 252

Generating and Editing Key Frames
Amending a key frame
Amending a number of key frames together
7-12
Chapter 7 Key Frame Effects
Use the following procedure to amend an already created key
frame.
1
Select the active channels and the reference channel.
2
Stop the effect on the required edit point.
When the edit point is on a key frame, that key frame will be
amended. If the edit point is intermediate between two key
frames, the immediately previous key frame will be amended.
3
Press the KF EDIT ENABL button, turning it on.
4
Amend the key frame.
5
Press the MOD button.
This carries out the amendment.
To carry out the same amendment to all key frames in a specified
range, use the following procedure.
When more than one channel is active, the amendment is carried
out based on the specification for the reference channel.
1
Select the active channels and the reference channel.
2
Stop the effect on or after the first key frame in the range to be
amended.
This operation is not necessary if you are going to specify the
starting key frame by number, or if you wish to amend all key
frames.
3
Press the KF EDIT ENABL button, turning it on.
4
Amend the key frame.
5
Press the MOD ALL button.
The MOD ALL button lights green.