Restoring The Channel Settings Before The Digital Copy Operation - Sony PCM-3348HR Quick Reference

16. Digital Copy Function
16-6. Restoring the Channel Settings Before the Digital Copy
Operation
1
Before pressing the DIGITAL COPY button, use the buttons in the SET UP
MEMORY panel to save the channel settings.
2
Press the DIGITAL COPY button.
This sets all channels to the recording inhibited state.
3
After setting the source and destination channels, press the button in the SET
UP MEMORY panel used in step 1, to recall the channel settings.
This returns the settings of all channels other than the source and destination
channels to their state before pressing the DIGITAL COPY button.
If a single channel is set both to the recording ready state and as a
destination channel
If a channel was previously in the recording ready state, and is thus restored in step
3 above, and is simultaneously set as a digital copy destination channel, the
destination channel setting takes precedence.
Restoring the channel settings after the digital copy ends
When the digital copy ends, and you press the DIGITAL COPY button, turning it
off, all channels go to the recording inhibited state. To restore the channels to the
state before turning off the DIGITAL COPY button, first, while the DIGITAL
COPY button is still lit, save the channel settings using the buttons on the SET UP
MEMORY panel. Then after pressing the DIGITAL COPY button, turning it off,
recall the channel settings from the memory.
40 Digital Copy Function