Sony BZDM-7020 User Manual page 103

Adjusting the frame position
Adjust the parameters for the items shown below.
Item Setting
"Crop All" a) Adjust the
cropping of two or
four edges
together.
"Separate Adjust the
Crop" cropping of all
four edges
separately.
a) The parameter values for this item are always shown as "***", but the
setting is reflected in the individual parameter values under "Separate
Crop". It is also possible to input a value from the numeric keypad.
CROP OFF
Softening the cropping edge – F3 (EDGE SOFT)
This function is only enabled when F1 (BORDER) in the
BORDER menu is "OFF".
Use the following procedure.
1
Press F3 (EDGE SOFT), turning it on.
2
Turn the left knob ("Soft") to adjust the degree of softening of
the edge (0 to 100%).
CROP settings
Knob adjustments of parameters
Left ("H"): Adjust cropping of left and
right edges.
Center ("V"): Adjust cropping of upper
and lower edges.
Right ("All"): Adjust cropping on all
four edges.
Left ("Left"): Adjust cropping of left
edge (–5 to +5).
Center ("Right"): Adjust cropping of
right edge (–5 to +5).
Left ("Top"): Adjust cropping of upper
edge (–4 to +4).
Center ("Bttm"): Adjust cropping of
lower edge (–4 to +4).
Left
CROP ON
Chapter 5 Special Effects Operations
Right
Top
Bttm
5-19